Walking and running are the natural gaits of human. Since human use just two legs for locomotion the moving system is naturally unstable, we could stumble and fall over. To feel free in locomotion, stability is absolutely necessary.
In this project we focus on strategies required for stability in bipedal gaits. One part of the project is to apply a leg control during swing phase in order to compensate perturbations. A single leg strategy, e.g. swing-leg retraction, seems to be not unique in human gait. Therefore, we combine two or more strategies, e.g. retraction and leg stiffening, which is more naturala and can be veryfied in human experiments.
In the second part of this project we investigate on how parts of the leg influence stability in locomotion. Herefore, we increase the complexity of a model and implement e.g. elastic joints. This bottom up process allows for a sharp view on single design elements and to identify their influence on leg dynamics and gait stability.
Involved People: Yvonne Blum, Jürgen Rummel, Daniel Maykranz, André Seyfarth
Previous people: Fumiya Iida, Hartmut Geyer, Elmar Dittrich, Heidi Knuesel
The fundamental model for investigating bipedal gaits is the spring-mass model. In this template the legs are represented as massless springs and the body is reduced to a point mass. The spring-mass model is able to show the leg dynamics in both, walking and running.
Based on the spring-mass model a template was created with an additional massless rigid foot element attached to the ankle. Between the foot element and the leg spring an elastic element was placed. In this model the resulting forces in periodic gait patterns as well as stability can be investigated.
The two-segment leg has massless bones and the the elastic structure is located at joint level. This model allows to identify on how leg segmentation influences running stability. Basically, the transmission from joint torque to leg force is highly nonlinear and is the reason for stable low speed running and hopping.
JenaHopper with an elastic two-Segment leg is the first robot of the Lauflabor. This robot shows stable hopping motion just by swinging the leg back and forth. JenaHopper was the inspiration for some research topics in the Lauflabor, e.g. the investigation of leg design and hip control.
PogoHopper is the robot most related to the spring-mass model. The PogoHopper has a telescoping leg and linear spring. This robot is used to prove swing-leg strategies previously identified with the spring-mass model. Additionally, PogoHopper helps to investigate hip torques during stance phase.
Numerous biomechanical variables are supplied by a number of experiments on human walking and running. These include ground reaction forces, motion analysis, and surface EMG, which are basis for a broad variety of analysis.
JenaHopper is a monopedal robot designed for investigating the role of leg segmentation in compliant legs. Experiments on JenaHopper have shown that the leg design enables for highly simplified control strategies to stabilize hopping.
The robot JenaHopper was recently described in a review article in Science Magazine. Here, the stabilizing behaviour of BioLegI is shown for emphasizing the importance of compliant legs in locomotion.
Seyfarth et al., Running and Walking with Compliant Legs, Springer Berlin Heidelberg, pp. 383-402, 2006
Conference Contributions